2020-21

JOURNAL PUBLICATIONS
  • Dhiman Saha, Yu Sasaki, Danping Shi, Ferdinand Sibleyras, Siwei Sun, Yingjie Zhang: On the Security Margin of TinyJAMBU with Refined Differential and Linear Cryptanalysis, Accepted at IACR Transactions on Symmetric Cryptology, ISSN 2519-173X, Vol. 2020, No. 3.
    Details: IACR Website yet to be updated. Mail confirmation available.
  • A. Dash, S. Samanta, J. Dey, U. Gangopadhyaya, S. Ghosh, V. Roy, “Anisotropic transport properties of a hadron resonance gas in a magnetic field”, Phys. Rev. D Vol. 102, pp. 016016 (2020). [LINK]
  • S. Mondal, S. Ghosh, “Possibilities of exponential or Sigmoid growth of Covid19 data in different states of India”, Indian Journal of Applied Research Vol. 10, issue 6 (2020) [LINK]
  • S. Mondal, S. Ghosh, “Fear of exponential growth in Covid19 data of India and future sketching”, International Journal of Creative Research Thoughts Vol. 8, pp. 2422 (2020). [LINK]
  • A. Baksi, D. Saha and S. Sarkar, "To infect or not to infect: a critical analysis of infective countermeasures in fault attacks", Journal of Cryptographic Engineering (JCEN), 2020. [LINK]
  • S. A. Mohammad, S. Shingdilwar, and S. Banerjee, “Macromolecular engineering approach for the preparation of new architectures from fluorinated olefins and their applications”, Prog. Polym. Sci. 2020, 106, 101255. [LINK]
  • S. A. Mohammad, S. Shingdilwar, and S. Banerjee, “Recoverable and recyclable nickel-cobalt magnetic alloy nanoparticle catalyzed reversible deactivation radical polymerization of methyl methacrylate at 25 οC”, Polym. Chem, 2020, 11, 287-291, 2020. [LINK]
BOOK CHAPTER
  • S. Banerjee and B. Ameduri, “Emerging Opportunities in (co)Polymerization of Alkyl 2-(Trifluoromethyl)acrylates and 2-(trifluoromethyl)acrylic acid and their Applications” in Frontiers of Organofluorine Chemistry, Edited by Iwao Ojima, World Scientific, 2020, Hardback ISBN: 978-1-78634-732-9.
CONFERENCE PUBLICATIONS
  • Aikata, Banashri Karmakar Dhiman Saha: PRINCE under Differential Fault Attack: Now in 3D, To Appear In Proceedings of the 4th ACM Workshop on Attacks and Solutions in Hardware Security Workshop, ASHES 2020, November 13, 2020, Orlando, Florida, USA.
  • Amit Jana, Dhiman Saha, Goutam Paul: Differential Fault Analysis of NORX, To Appear In Proceedings of the 4th ACM Workshop on Attacks and Solutions in Hardware Security Workshop, ASHES 2020, November 13, 2020, Orlando, Florida, USA. [LINK]
  • A. Baksi, V. B. Y. Kumar, B. Karmakar, S. Bhasin, D. Saha, A. Chattopadhyay, "A Novel Duplication Based Countermeasure To Statistical Ineffective Fault Analysis", in Proceedings of the 25th Australasian Conference on Information Security and Privacy (ACISP), November 25-27, 2020, Perth, Australia.[LINK]
  • S. Suryawanshi, D Saha, S. Sachan, "New Results on the SymSum Distinguisher on Round-Reduced SHA-3", in Proceedings of the 12th International Conference on Cryptology (AFRICACRYPT), July 20-22, 2020. Cairo, Egypt.[LINK]
  • M. Rahman, D. Saha, G. Paul, "Cryptanalysis of FlexAEAD", in Proceedings of the 12th International Conference on Cryptology (AFRICACRYPT), July 20-22, 2020. Cairo, Egypt. [LINK]
  • Aikata, B. Karmakar, D. Saha, "DESIV: Differential Fault Analysis of SIV-Rijndael256 with a Single Fault", in Proceedings of the 13th IEEE International Symposium on Hardware-Oriented Security and Trust (HOST), December 6-9, 2020, San Jose, CA, USA.[LINK]

2019-20

JOURNAL PUBLICATIONS
  • S. Satapathy, S. Paul, A. Anand, R. Kumar, S. Ghosh, “From Non-interacting to Interacting Picture of Thermodynamics and Transport Coefficients for Quark Gluon Plasma”, Journal of Physics G, Vol. 47, pp. 045201, 2020. doi: 10.1088/1361-6471/ab614d [LINK]
  • S. Ghosh, S. Samanta, S. Ghosh, H. Mishra, “Viscosity calculations from hadron resonance gas model: Finite size effect”, International Journal of Modern Physics E, Vol. 28, pp. 1950036, 2019. doi : 10.1142/S0218301319500368 [LINK]
  • S. Ghosh, P. Mohanty, B. Chatterjee, A. Mukharjee, H. Mishra, “Impact of magnetic field on shear viscosity of quark matter in Nambu–Jona-Lasinio model”, Physical Review D, Vol. 100, pp. 034024, 2019. doi : 10.1103/PhysRevD.100.034024 [LINK]
  • A. Adhikary, J. Roy, A. G. Kumar, S. Banerjee, and K. Biswas, "An Impedimetric Cu-Polymer Sensor-Based Conductivity Meter for Precision Agriculture and Aquaculture Applications", IEEE Sensor Journal, Vol. 19 (24), pp. 12087-95, 2019. doi: 10.1109/JSEN.2019.2940159.
  • A. Adhikary, A. Shil, and K. Biswas, "Realization of Foster Structure-Based Ladder Fractor with Phase Band Specification", Circuits, Systems and Signal Processing, pp. 1-21, 2019. doi: [LINK]
  • S. Banerjee, B. V. Tawade, and B. Ameduri, “Functional Fluorinated Polymer Materials and Preliminary Self-Healing Behavior” Polym. Chem., vol. 10, pp. 1993-1997, 2019.
  • M. P. Iqbal, R. Jain, and S. K. Pal, "Numerical and experimental study of friction stir welding of aluminum alloy pipe", Journal of materials processing technology, 274, PP 116-228, 2019. [LINK].
  • A. Sultana and X. Qin, "On the equivalence of the Mizoguchi-Takahashi locally contractive map and the Nadler’s locally contractive map", Numerical Functional Analysis and Optimization, pp 1964-71, 2019. doi.org/10.1080/01630563.2019.1658603.
  • S. Azim, S. Gangopadhyay, S.S. Mahapatra, R.K. Mittal, A.Singh, R.K. Singh, "Study of cutting forces and surface integrity in micro drilling of a Ni-based superalloy", Journal of Manufactuirng Processes, Vol. 45, pp. 368-378, 2019. doi: 10.1016/j.jmapro.2019.07.016.
  • P. K. Samanta, M. M. Alam, R. Misra, and S. K. Pati, "Tuning of hyperpolarizability, and one- and two-photon absorption of donor–acceptor and donor–acceptor–acceptor-type intramolecular charge transfer-based sensors", Phys. Chem. Chem. Phys., Vol. 21, 17343-55, 2019, DOI: 10.1039/C9CP03772A.
  • B. Gorain, P. S. Mandal, "Approximation Algorithms for Barrier Sweep Coverage", Int. J. Found. Comput. Sci. 30(3): pp 425-448, 2019.
  • S. Gupta, G. Hodes, “Effect of SnF2 concentration on the Optoelectronic and PV Cell Properties of CsSnBr3.”, SN Applied Science, Vol. 1, 1066-72, 2019. [LINK].
  • Udayraj, F Wang, W Song, Y Ke, P Xu, C S W Chow, and N Noor. "Performance enhancement of hybrid personal cooling clothing in a hot environment: PCM cooling energy management with additional insulation". Ergonomics, Vol. 62 (7), pp. 928-939, 2019. [LINK]
  • Z Kang, F Wang, and Udayraj. "An advanced three-dimensional thermoregulation model of the human body: Development and validation". International Communications in Heat and Mass Transfer, Vol. 107, pp. 34-43, 2019. [LINK].
  • B. Choudhary, Udayraj, F Wang, Y Ke, and J Yang. "Development and experimental validation of a 3D numerical model based on CFD of the human torso wearing air ventilation clothing". International Journal of Heat and Mass Transfer, Vol. 147, 2020. [LINK]
  • S. Ghosh, K. K. Kataria, and P. Vellaisamy, "On transmuted generalized linear exponential distribution", Communications in Statistics - Theory and Methods, pp. 1-23, 2019. doi: 10.1080/03610926.2019.1655577.
  • S. Kommalapati, A. Agrawal, and V. S. Duryodhan, "Enhancing Miscible Fluid Mixing by Introducing Pseudo Turbulent Flow in Golden Ratio Spiral Microchannel", Ind. Eng. Chem. Res., Vol. 59 (9), pp. 3784-93, 2020. [LINK].
  • C. Hartmann, S. Gupta, T. Bendikov, X. Kozina, T. Kunze, R. Félix, G. Hodes, R. G. Wilks, D. Cahen, and M. Bär, “Impact of SnF2 addition on the chemical and electronic surface structure of CsSnBr3 thin-film solar cell absorbers”, ACS Appl. Mater. and Interfaces, Vol. 12, pp. 12353-61, 2020. [LINK].
  • N. Ben, Q. Zhang, K. Bandyopadhyay, and M. G. Lee "Analysis of friction behaviour under oscillating forming process using T-shape compression test and finite element simulation" Journal of Materials Processing Technology, Vol. 275, pp. 116327, 2020. [LINK]
  • A. Bandyopadhyay, A. K. Dhar, and S. Basu, "Graph coloring: a novel heuristic based on trailing path - properties, perspective and applications in structured networks.", Soft Computing, Vol. 24(1), pp. 603-625, 2020. doi: 10.1007/s00500-019-04278-8
  • K U Mekrisuh, D Singh, and Udayraj. "Performance analysis of a vertically oriented concentric-tube PCM based thermal energy storage system: Parametric study and correlation development". Renewable Energy, Vol. 149, pp. 902-916, 2020. [LINK]
  • L.B. Varela, A. Cavaleiro, A.P. Tschiptschin, S. Gangopadhyay, F. Fernandes, "Tribological and milling performance of NbC–Ni films deposited by sputtering with different Ni contents", Tribology International, Vol. 147, pp. 106281, 2020. doi: 10.1016/j.triboint.2020.106281.
BOOK CHAPTER
  • S. Shingdilwar, S. A. Mohammad and S. Banerjee “Fluoropolymer-Based Tunable Materials for Emerging Applications” in Reuse and Recycling of Materials Solid Waste Management and Water Treatment, Edited by Jibin K. P., Nandakumar Kalarikkal, Sabu Thomas and Ange Nzihou, River Publishers, 2019, Hardback ISBN: 978-87-7022-058-3; EBook ISBN: 978-87-7022-057-6.
  • A. Ghosh, "Exploring flourishing in a multicultural work context: Proposed constructs for interventions." In L. E. van Zyl & S. Rothman (Eds.), Positive psychological intervention design and protocols for multi-cultural contexts (vol. 2). Cham, Switzerland: Springer International, 2019. doi: [LINK].
  • K. K. Kataria and P. Vellaisamy, "Adomian Decomposition Method and Fractional Poisson Processes: A Survey." In: Daftardar-Gejji V. (eds) Fractional Calculus and Fractional Differential Equations. Trends in Mathematics. Birkhäuser, Singapore, 2019. doi: [LINK].
CONFERENCE PUBLICATIONS
  • S. Satapathy, J. Dey, S. Ghosh, P. Murmu, “On lower bound of relaxation time for massless fluid in presence of magnetic field” in the National Conference entitled 64 DAE-BRNS Symposium on Nuclear Physics, University of Lucknow, India, Dec. 23-27, 2019. [LINK]
  • J. Dey, S. Ghosh, A. I. Chowdhury, “Causal aspects of effective QCD models” in the National Conference entitled 64 DAE-BRNS Symposium on Nuclear Physics, University of Lucknow, India, Dec. 23-27, 2019. [LINK]
  • A. Anand, S. Paul, S. Sathapathy, S. Ghosh, “Collisional time and shear relaxation time for interacting QGP” in the National Conference entitled 64 DAE-BRNS Symposium on Nuclear Physics, University of Lucknow, India, Dec. 23-27, 2019. [LINK]
  • S. Paul, A. Mishra, J. Dey, S. Satapathy, S. Ghosh, “Fluid property of QGP in presence of magnetic field”, in the National Conference entitled 64 DAEBRNS Symposium on Nuclear Physics, University of Lucknow, India, Dec. 23-27, 2019. [LINK]
  • R. kumar, A. Anand, S. Paul, S. Satapathy, S. Ghosh, “Mapping QGP interaction through its temperature dependent degeneracy factor”, in the National Conference entitled 64 DAE-BRNS Symposium on Nuclear Physics, University of Lucknow, India, Dec. 23-27, 2019. [LINK]
  • A. Mishra, S. Paul, J. Dey, S. Satpathy, S. Ghosh, “Role of interaction on electrical conductivity of QGP in the presence of magnetic field” in the National Conference entitled 64 DAE-BRNS Symposium on Nuclear Physics, University of Lucknow, India, Dec. 23-27, 2019. [LINK]
  • S. Satapathy, S. Ghosh, S. Das, R. Rapp, N. Sahoo, “Higgs in Quark-Gluon Plasma”, in the National Conference entitled 64 DAE-BRNS Symposium on Nuclear Physics, University of Lucknow, India, Dec. 23-27, 2019. [LINK]
  • J. Dey, S. Ghosh, A. Bandyopadhyay, R. L. S. Farias, G. Krein, “NJL model estimation of anisotropic electrical conductivity for quark matter in presence of magnetic field” in the National Conference entitled 64 DAE-BRNS Symposium on Nuclear Physics, University of Lucknow, India, Dec. 23-27, 2019.[LINK]
  • A. K. Dhar, R. R. Madireddy, S. Pandit, J. Singh, "Maximum Independent and Disjoint Coverage", in Proceedings of 15th Annual Conference on Theory and Applications of Models of Computation, Kitakyushu, Japan, pp. 134-153, April, 2019. doi: 10.1007/978-3-030-14812-6_9.
  • Sk A. Mohammad, S. Shingdilwar and S. Banerjee, “Smart, Functional Materials for Material for Better Future”, in Proceedings of National Conference on “Innovations in Chemistry and Environmental Engineering” (ICEE-2019), National Institute of Technology Raipur, April 29, 2019."
  • A. Adhikary, J. Roy, and K. Biswas, "Performance study of a two-electrode type aqueous conductivity sensor for smart farming", in Proceedings of 2019 IEEE International Instrumentation and Measurement Technology Conference (I2MTC), Auckland, New Zealand, pp. 1-6, May 20, 2019. doi: 10.1109/I2MTC.2019.8826887.
  • S. Banik, J. Bossert, A. Jana, E. List, S. Lucks, W. Meier, M. Rahman, D. Saha, and Y. Sasaki, “Cryptanalysis of ForkAES”, in Proceedings of the 17th International Conference on Applied Cryptography and Network Security (ACNS), Bogota, Colombia, pp. 43–63, June 5-7, 2019.
  • A. Faye, Y. Lev, and K. Y. Volokh. "Modeling dynamic fracture in rubberlike materials” in Constitutive Models for Rubber XI. Proceedings of the 11th European Conference on Constitutive Models for Rubber, Nantes, France, June 25-27, 2019. doi: 10.1201/9780429324710.
  • A. Faye, Y. Lev, and K. Y. Volokh. "A new calibration methodology for thermo-elastic deformation and failure of rubber-like materials", in Constitutive Models for Rubber XI. Proceedings of the 11th European Conference on Constitutive Models for Rubber, Nantes, France, June 25-27, 2019. doi: 10.1201/9780429324710.
  • Sk A. Mohammad, S. Shingdilwar and S. Banerjee, “Smart Polymer Materials: Design, Synthesis and Applications”, Kolkata Chapter Meeting of the Society for Polymer Science (SPS), India, IISER Kolkata, Mohanpur, India” July 5-6, 2019.
  • N. S. Selvarathinam, A. K. Dhar, S. Biswas, "Evil Twin Attack Detection using Discrete Event Systems in IEEE 802.11 Wi-Fi Networks.", in Proceedings of 27th Mediterranean Conference on Control and Automation (MED 2019), Akko, Israel, pp. 316-321, July 2019, doi: 10.1007/978-3-030-36412-0_12
  • S. Sidhanta, S. Mukhopadhyay, and W. Golab, “Dyn-YCSB: Benchmarking Adaptive Frameworks”, in Proceedings of 2019 IEEE World Congress on Services (SERVICES), Milan, Italy, pp. 392-393, August 2019. Doi: 10.1109/SERVICES.2019.00119.
  • Sk A. Mohammad, S. Shingdilwar and S. Banerjee, “Synthesis of Stimuli Responsive Amino Acid Based Zwitterionic Polymers via RAFT Polymerization” in the Advances in Polymer Science and Rubber Technology 2019 (APSRT-2019), September 24-27, 2019, IIT Kharagpur, India.
  • S. Shingdilwar, Sk Arif Mohammad and S. Banerjee, “Mesoporous Materials for Emerging Applications” in the Advances in Polymer Science and Rubber Technology 2019 (APSRT-2019), September 24-27, 2019, IIT Kharagpur, India.
  • Sk A. Mohammad, S. Shingdilwar, S. Dolui and S. Banerjee, “Multi-Stimuli Responsive Polymers with Precise Functionalities for Biomedical Applications”, Advances in Polymer Science and Rubber Technology 2019 (APSRT-2019), September 24-27, 2019, IIT Kharagpur, India
  • A. Ahuja, G. Gupta, and S. Sidhanta, “Edge Applications: Just Right Consistency”, in Proceedings of 38th International Symposium on Reliable Distributed Systems, Lyon, France, October 3, 2019.
  • S. Sidhanta, R. Dias, and R. Rodrigues, “A More Consistent Understanding of Consistency”, in Proceedings of 38th International Symposium on Reliable Distributed Systems, Lyon, France, October 8, 2019.
  • Udayraj. "Effect of UHI and building geometry on pollution dispersion in an urban street canyon". In Proceedings of the 5th International Conference on Countermeasures to Urban Heat Islands (IC2UHI 2019), IIIT Hyderabad, Hyderabad, India, December 02-04, 2019. [Best paper Award]
  • B Choudhary, Udayraj, and F Wang. "Numerical analysis of cooling performance of air ventilation clothing". Proceedings of the 25th National and 3rd International ISHMT-ASTFE Heat and Mass Transfer Conference (IHMTC-2019), IIT Roorkee, Roorkee, India, December 28-31, 2019. (IHMTC2019-CFD-603).
  • S. Sarkar, K. Mandal, and D. Saha, "On the Relationship Between Resilient Boolean Functions and Linear Branch Number of S-Boxes", in Proceedings of the 20th International Conference on Cryptology in India, INDOCRYPT 2019, Hyderabad, India, pp. 361-374, December 15-18, 2019.
  • A. K. Dhar, B. Gorain, K. Mondal, S Patra, R R Singh: "Edge Exploration of a Graph by Mobile Agent". in Proceedings of 13th Annual International Conference on Combinatorial Optimization and Applications (COCOA'19), Xiamen, China, pp. 142-154, December, 2019, doi: 10.1007/978-3-030-36412-0_12.
  • A. Adhikary, and D. Roy, " Fractional Order Parameter Estimation from the Nyquist Plots with Two Distinct Lobes", in Proceedings of 2020 First International Conference on Power, Control and Computing Technologies (ICPC2T, Raipur, India, pp. 250-255, January 3, 2019.
  • Sk A. Mohammad, S. Shingdilwar, S. Dolui, D. Kumar. and S. Banerjee. “Functional Polymer Materials with Tunable Properties for Emerging Application”, International Conference on Functional Materials (ICFM2020), January 6-8, 2019, IIT Kharagpur, India.
  • Sk A. Mohammad, S. Shingdilwar, S. Dolui, D. Kumar. and S. Banerjee. “Ni-Co Magnetic Alloy Nanoparticle Mediated Synthesis of Well -defined Polymers via Reversible Deactivation Radical Polymerization” in the International Conference on Functional Materials 2020 (ICFM-2020), January 6-8, 2020, IIT Kharagpur, India.
  • S. Shingdilwar, Sk A. Mohammad, S. Dolui, D. Kumar. and S. Banerjee. “Developing Functional Organic Mesoporous materials by ATRP and its Application in CO2 capture technology” in the International Conference on Functional Materials 2020 (ICFM-2020), January 6-8, 2020, IIT Kharagpur, India.
  • S. Dolui, D. Kumar, Sk A. Mohammad, S. Shingdilwar and S. Banerjee, “Multi-stimuli Responsive Molecular Materials” in the International Conference on Functional Materials 2020 (ICFM-2020), January 6-8, 2020, IIT Kharagpur, India.
  • A.K. Choudhary, and R. Jain, "A coupled thermo-mechanical model based on coupled Eulerian Lagrangian to simulate friction stir welding to predict forces and defect formation", 6th Asian heat transfer and surface engineering conference (6AHTSE), ASM International Chennai chapter, March 5-7, 2020.
  • F. Ellen, B. Gorain, A. Miller, and A. Pelc: "Constant-Length Labeling Schemes for Deterministic Radio Broadcast", in Proceedings of 31st ACM Symposium on Parallelism in Algorithms and Architectures (SPAA 2019): pp. 171-178, Phoenix, AZ, USA, [LINK]
  • S. Bodda and P. Agnihotri, ""Deep Learning based AC Line Fault Classifier and Locator for Power System," in Proceedings of 2019 Innovations in Power and Advanced Computing Technologies (i-PACT), Vellore, India, 2019, pp. 1-5.
  • P. Agnihotri, A. M. Kulkarni, A. M. Gole and A. Sinkar, "An Analog Circuit Approach for Optimal Damping of Inter-Area Oscillations using Wide Area Control of Power Converters," in Proceedings of 2019 IEEE Canadian Conference of Electrical and Computer Engineering (CCECE), Edmonton, AB, Canada, 2019, pp. 1-4.
  • Priyesh Pandey and P. Agnihotri, ""An Efficient LLC Resonant Converter Design for Photovoltaic Application" in Proceedings of 8th International Conference on Power System (ICPS), Jaipur 2019

2018-19

JOURNAL PUBLICATIONS
  • G. D. Sathiaraj, W. Skrotzki, R. J. Immanuel, A. Pukenas, R. Schaarschuch, S. K. Panigrahi, J. A. Chelvane, and S. S. Kumar, “Microstructure and Texture of Cold Rolled and Recrystallized CrNoNi Medium-Entropy Alloy”, Materials Science Forum, Vol. 941, pp. 833-838, 2018.
  • G. D. Sathiaraj, W. Skrotzki, A. Pukenas, R. Schaarschuch, R. J. Immanuel, S. K. Panigrahi, J. A. Chelvane, and S. S. Kumar, “Effect of annealing on the microstructure and texture of cold rolled CrCoNi medium-entropy alloy”, Intermetallics, Vol. 101, pp. 87-98, 2018.
  • K. Bandyopadhyay, N. Y. Ben, Q. Zhang, H. Choi, and M. G. Lee, Experimental and finite element analysis on oscillating cold forming in consideration of nonlinear loading-unloading-reloading behavior, Journal of Manufacturing Processes, vol. 36, 520-534, 2018.
  • A. Mukherjee and D. Milstein “Homogeneous Catalysis by Cobalt and Manganese Pincer Complexes". ACS Catalysis, Vol. 8(12), pp 11435–69, 2018.
  • Z. Wang, Z., K. Rodewald, R. Medishetty, B. Rieger, and R.A. Fischer, “Control of Water Content for Enhancing the Quality of Copper Paddle-Wheel-Based Metal–Organic Framework Thin Films Grown by Layer-by-Layer Liquid-Phase Epitaxy”. Cryst. Growth. Des. Vol. 18, pp. 7451-59, 2018.
  • P. K Sharma, S Biswas, and P Mitra, “Energy Efficient Heuristic Application Mapping for 2-D Mesh-based Network-on-Chip”, Microprocessors and Microsystems, Elsevier, Vol. 64, pp. 85-100, 2019.
  • B. Bhowmik, J. K. Deka, S. Biswas, and B. B. Bhattacharya, "Performance-Aware Test Scheduling for Diagnosing Coexistent Channel Faults in Topology-Agnostic Networks-on-Chip", ACM Transactions on Design Automation of Electronic Systems (TODAES), Vol. 24(2), pp. 1-17, 2019
  • S. Vempati, S. Ozcan, and T. Uyar 'Temporary and permanent changes to the defect equilibrium due to ultraviolet exposure: Surface and bulk effects on ZnO nanostructures' Appl. Surf. Sci. Vol. 457, pp. 676, 2018.
  • S. Vempati, J. Deinert, L. Gierster, L. Bogner, C. Richter, N. Mutz, S. Blumstengel, A. Zykov, S. Kowarik, Y. Garmshausen, J. Hildebrandt, S. Hecht, and J. Stähler, “Uncovering the (un-)occupied electronic structure of a buried hybrid interface” J. Phys.: Condens. Matter Vol. 31, pp. 094001, 2019.
  • L. Foglia, S. Vempati, B. T. Bonkano, L. Gierster, M. Wolf, S. Sadofev, and J. Stähler “Revealing the Competing Contributions of Charge Carriers, Excitons, and Defects to the Non-Equilibrium Optical Properties of ZnO” Structural Dynamics, Vol. 6(3), pp. 034501, 2019.
  • P. Chauhan, R. Jain, S. K. Pal, and S. B. Singh, “Modeling of defects in friction stir welding using coupled Eulerian and Lagrangian method”, Journal of Manufacturing Process. Vol. 34, pp. 158–166, 2018.
  • S. Banerjee, V. Ladmiral, C. Totée, and B. Ameduri, “Alternating Radical Copolymerization of Vinyl Acetate with tert-Butyl 2-Trifluoromethylacrylate” Eur. Polym. J. Vol. 104, pp. 164-169, 2018.
  • S. Banerjee, M. Guerre, B. Ameduri and V. Ladmiral, “Syntheses of 2-(trifluoromethyl)acrylate-containing Block Copolymers via RAFT Polymerization using a Universal Chain Transfer Agent” Polym. Chem. Vol. 9, pp. 3511-21, 2018.
  • S. Banerjee, J. Schmidt, Y. Talmon, H. Hori, T. Asai, and B. Ameduri, “A Degradable Fluorinated Surfactant for Emulsion Polymerization of Vinylidene Fluoride” Chem. Commun. Vol. 54, pp. 11399, 2018.
  • S. Banerjee, B. Tawade, and B. Ameduri, “Functional Fluorinated Polymer Materials and Preliminary Self-Healing Behavior” Polym. Chem. Vol. 10, pp. 1993-97, 2019.
  • Y. Lev, A. Faye, and K. Y. Volokh. “Thermoelastic deformation and failure of rubberlike materials”, Journal of the Mechanics and Physics of Solids, Vol. 122, pp. 538-554, 2019.
  • A. Faye, Y. Lev, and K. Y. Volokh, “The effect of local inertia around the crack-tip in dynamic fracture of soft materials”, Mechanics of Soft Materials, Vol. 1, pp. 1-21, 2019.
  • N. Chander, E. Jayaraman, M. Rawat, A. Bagui, S S K Iyer, “Stability and Reliability of PTB7: PC71BM and PTB7: PC61BM Inverted Organic Solar Cells: A Comparative Study”, IEEE Journal of Photovoltaics, Vol. 9 (1), pp. 183-193, 2019.
  • N. Narendra, S. Patra, N. Sahu, S. Shil, "Baryogenesis via Leptogenesis from Asymmetric Dark Matter and radiatively generated Neutrino mass,", Phys. Rev. D Vol. 98 (9), p. 095016, 2018.
  • S. Shingrala, R. Mohanta, S. Patra, S. Rao, "Majorana Dark Matter in a new B-L Model,", Journal of Cosmology and Astro-particle Physics, Vol. 1811 (11), p. 026, 2018.
  • D. Borah, A. Dasgupta, S. Patra, "Neutrinoless double beta decay in minimal left-right symmetric model with universal seesaw,”, Int. J. Mod. Phys. A, Vol. 33 (35), p. 185098S, 2018.
  • S. Shingrala, R. Mohanta, S. Patra, "Singlet scalar Dark Matter in U (1) _{B-L} models without right-handed neutrinos,”, Eur. Phys. J. Plus, Vol. 133(11), p. 477, 2018.
  • M. Sruthilaya, R. Mohanta, and S. Patra, “A4 realization of linear seesaw and neutrino phenomenology”, Eur. Phys. J. C, Vol. 78, p. 719, 2018.
  • B. Gorain and A. Pelc, "Deterministic Graph Exploration with Advice", ACM Transactions on Algorithms, Vol. 15 (1), p. 8, 2019.
  • D. Saha, M. Rahman, and G. Paul, “N`ew Yoyo Tricks with AES-based Permutations”, IACR Transactions on Symmetric Cryptology, vol. 2018 (4), pp. 102-127, 2018.
  • S. Ghosh, F. E. Serna, A. Abhishek, G. Krein, H. Mishra, "Transport responses from rate of decay and scattering processes in the Nambu–Jona-Lasinio model", Phys. Rev. D, Vol. 99, p. 014004, 2019.
  • S. Ghosh, S. Ghosh, S. Bhattacharyya, "Phenomenological bound on the viscosity of the hadron resonance gas", Phys. Rev. C, Vol. 98, p. 045202, 2018.
  • K. Saha, S. Ghosh, S. Upadhaya, S. Maity, "Transport coefficients in a finite volume Polyakov–Nambu–Jona-Lasinio model", Phys. Rev. D, Vol. 97, p. 116020, 2018.
  • P. Singha, A. Abhishek, G. Kadam, S. Ghosh, H. Mishra, "Calculations of shear, bulk viscosities and electrical conductivity in the Polyakov-quark–meson model", J. Phys. G, Vol. 46, p. 015201, 2019.
  • S. Samanta, S. Ghosh, B. Mohanty, "Finite size effect of hadronic matter on its transport coefficients", J. Phys. G, Vol. 45, p. 075101, 2018.
  • B. Das, M. Enduri, M. Kiyomi, N. Misra, Y. Otachi, I. V. Reddy, and S. Yoshimura. "On structural parameterizations of firefighting." Theoretical Computer Science, Vol. 782, pp. 79-90, 2019.
  • A. K. Dhar, R. Reddy Madireddy, S. Pandit, and J. Singh, "Maximum Independent and Disjoint Coverage", in 15th Annual Conference on Theory and Applications of Models of Computation (TAMC2019), Kitakyushu, Japan, March 2019.
BOOK CHAPTER
  • P. C. Shukla. "Non-Noble Metal-Based Catalysts for the Application of Soot Oxidation", in Advanced Engine Diagnostics. Springer, Singapore, pp. 127-142, 2019.
  • A. Adhikary and K. Biswas, “Four Quadrant Fractors and Their Applications in Fractional Order Circuits”, in Applications in Engineering, Life and Social Sciences, Walter de Gruyter GmbH & Co KG, pp. 33-64, 2019.
CONFERENCE PUBLICATIONS
  • Sk A. Mohammad, S. Shingdilwar, and S. Banerjee, “Functional Mesoporous Silica-Polymer Hybrid Nanospheres: Design, Synthesis Application” in the International Conference entitled Chemical & Biological Sciences in Drug Delivery-2019 (IC-CBSDD2019), Berhampur University, India, Mar. 8-10, 2019.
  • S. Shingdilwar, Sk A. Mohammad, and S. Banerjee, “Functional Polymer Materials for CO2 Capture” in the National Conference on Advances in Chemical Engineering & Sciences (ACES2019), IISER Bhopal, India, Mar. 7-8, 2019.
  • V. M. Suryasarman, S. Biswas, and A. Sahu, “RSBST: A Rapid Software-based Self-Test Methodology for Processor Testing”, in IEEE Conference VLSI Design (VLSID), Delhi, India, Jan 5-9, 2019.
  • P. K. Biswal and S. Biswas, “A Binary Decision Diagram Approach to On-line Testing of Asynchronous Circuits”, in IEEE Conference VLSI Design (VLSID), Delhi, India, Jan 5-9, 2019.
  • K. M. Singh, S. Biswas, and J. K. Deka, “ATPG for Incomplete Testing of SoC and Power Aware TAM Architecture” in IEEE INDICON, Chennai, India, Dec. 15-18, 2018.
  • S. Shingdilwar, Sk A. Mohammad, and S. Banerjee, “Design, Synthesis and Applications of Functional Mesoporous Molecular Materials”, SPSI-MACRO 2018, in International Conference on Polymer Science and Technology, IISER Pune, Pune, India, Dec. 19-22, 2018.
  • P. K. Bhale, S. Biswas, and S. Nandi, “An Adaptive and Lightweight Solution to Detect Mixed Rate IP Spoofed DDoS Attack in IoT Ecosystem” in IEEE INDICON, Chennai, India, Dec. 15-18, 2018.
  • S. Shingdilwar and S. Banerjee, “Design, Synthesis and Applications of Mesoporous Silica-Polymer Hybrid Nanospheres”, in One Day National Conference on the Recent Advances on Functional Nanomaterials (BOSE125), Raipur, India, Sep. 28, 2018.
  • S. Upadhaya, K. Saha, S. Ghosh, S. Maity, "Shear Viscosity from finite volume PNJL model", in Proceedings of the DAE Symp. on Nucl. Phys. Mumbai, India, p. 988, Dec. 10-14, 2018.
  • S. Maity, K. Saha, S. Ghosh, S. Upadhaya, "Effects of finite volume on Bulk viscosity from PNJL model", in Proceedings of the DAE Symp. on Nucl. Phys. Mumbai, India, p. 988, Dec. 10-14, 2018

Message From Director

IIT Bhilai is striving for research-driven undergraduate and postgraduate education. Our objective is to create an education system with multifacet outcomes including research, entrepreneurship, technical leadership, and above all, responsible citizenship. Read More

Newsletter

Subscribe to our Newsletter and stay tuned.